Quantum DXi4510 User Manual page 212

Chapter 9: DXi4000 Configuration
System
188
Caution: Specifying a default gateway is required to enable
connectivity with all subnets other than those that
the DXi4000 is directly connected to. For example,
if the DXi4000 and its clients are on different
subnets, you must specify a default gateway.
• Domain Suffix Search List - (Optional) The local domain to
search first when resolving domain names.
The domain suffix is a single domain name. The domain name
may contain only letters (A–Z), numbers (0–9), dots (.), and
hyphens (-).
• Primary, Secondary, and Tertiary DNS IP Address - (Optional)
The IP addresses of up to three DNS servers used to resolve
domain names and translate them into IP addresses.
Note: You must specify a DNS IP address if you plan to use
hostname format when configuring an NTP time server,
outgoing e-mail server, replication sources and targets,
and other information.
Note: If you are using network segmentation, you must
specify a DNS server for the Data IP address to enable
NAS access.
Note: The Domain Suffix Search List and DNS IP Addresses
cannot be modified if the DXi4000 is currently joined to a
Windows domain. To disjoin a Windows domain, see
Windows Domain
3 Under Network Interfaces, select a bonding option:
DXi4000 - 4510/4520/4601 (4 x 1GbE ports)
• BOND ALL (Replication/Management/Data) - All ports (ETH2,
ETH3, ETH4, and ETH5) are bonded together for all traffic types.
Each traffic type (Data, Management, and Replication) requires
a set of network settings below.
• ETH2 (Replication), BOND ALL-1 (Management/Data) - All
Replication traffic takes place on port ETH2. Data and
Management traffic take place on ports ETH3, ETH4, and ETH5.
on page 144.
Quantum DXi4000 User's Guide