Quantum DXi4510 User Manual page 167

Quantum DXi4000 User's Guide
Note: If you are editing a share, only the Description, Enforce
read-only access, Hide from network browsing, and
Allow all users to access this share options can be
changed.
• Description - (Optional) Enter a brief description of the share.
• Enforce read-only access - Select the check box to make the
share read only. If selected, you cannot write to the share.
• Hide from network browsing - (CIFS shares only) Select the
check box to hide the share from network browsing. If selected,
you cannot see the share when browsing the network.
• Allow all users/hosts to access this share - Select this check
box to allow all users (CIFS shares) or hosts (NFS shares) to
access the share.
Or clear the check box to allow only specified users or hosts to
access the share. To add a user or host to the access list, click
Add. Specify the Workgroup User (CIFS shares) or the
Hostname or IP Address (NFS shares) and the associated
permissions (Read Only or Read & Write), and then click Apply.
Note: To modify the users that are available in the
Workgroup User list, see
Note: After you add a user or host to the access list, you
cannot change their permissions. Instead, select the
user or host in the access list and click Delete to
remove them from the list. Then add the user or host
again with the correct permissions.
3 Click Apply.
Note: If you modify a NAS share that uses the CIFS protocol, you
must restart the CIFS service for the changes to take effect. To
restart the CIFS service, first disjoin the Windows workgroup,
then join it again (see
Restarting the CIFS service will close all active connections to
the share. Most Windows workstations will automatically
reconnect, but some applications may be affected.
Chapter 9: DXi4000 Configuration
Share Access
Windows Domain on page 144).
NAS
on page 147.
143