Picture Controls - Barco CINEVERSUM 60 Installation Manual

4. Getting Started
The following key numbers are valid :
1. PC source
2. RGB/Component source (5 RCA input)
3. DVI
4. S-Video
5. Video
6. Component (3 RCA)

Picture Controls

When an image control is pressed, a text box with a bar scale and function name of the control, e.g. 'brightness...' appears on
the screen (only if Barscale status is Yes). The length of the bar scale and the value of the numeric indication indicate the current
memorized setting for this source. The bar scale changes as the arrows on the RCU are pressed or the + or - buttons on the local
keypad.
The picture settings are saved in the image file.
Brightness
Contrast
Color
Tint (Hue)
Sharpness
Freeze
The Pause Key
When the Pause key is pressed, the image projection is stopped, the image is removed from the screen.
To restart the image projection:
• Press PAUSE key
30
Use the + button for a higher brightness.
Use the - button for a lower brightness.
Use the + button for a higher contrast.
Use the - button for lower contrast.
Use the + button for richer colors.
Use the - button for lighter colors.
Tint is only active for Video and S-Video when using a 60 Hz source (like NTSC 4.43 or NTSC 3.58).
Use the + button
Use the - button.
Use the + button for a sharper picture.
Use the - button for a softer picture.
Press Freeze to freeze the displayed image.
R5976763 CINEVERSUM 60/70 22042004