Table of Contents
Advertisement
8. Advanced Settings
How to size the image ?
1. Push the cursor key ↑ or ↓ to highlight Position. (menu 8-11)
2. Press ENTER to select.
The Position menu will be displayed. (menu 8-12)
3. Push the cursor key ↑ or ↓ to highlight Vertical size.
A slide bar will be displayed.
4. Use the cursor keys to resize the image vertically.
When the value is negative the image becomes less high.
When the value is positive the image becomes higher.
The adjustment range can vary from - 255 to + 255. 0 is the nominal position.
Advanced settings
Aspect Ratio
Position
PiP Configuration
Blanking
Input Balance
Back
Menu 8-11
8.5 Blanking
What can be done ?
Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and
to hide or black out unwanted information (or noise). A '0' on the bar scale indicates no blanking.
Which blanking adjustments are available ?
•
top blanking
•
bottom blanking
•
left blanking
•
right blanking
50
Position
Horizontal shift
Horizontal size
Vertical shift
Vertical size
Back
Menu 8-12
R5976763 CINEVERSUM 60/70 22042004
Advertisement
Table of Contents
