Table of Contents
Advertisement
9. Installation menu
How to adjust the Vertical keystone ?
1. Push the cursor key ↑ or ↓ to highlight V-Keystone. (menu 9-33)
2. Press ENTER to select.
A bar scale will be displayed.
3. Push the cursor key ↑ or ↓ to adjust the vertical keystone.
Adjust until the left and right vertical lines are straight.
Installation
Input slots
File service
Internal pattern
When no signal
Source transition
OSD configuration
Language
V-Keystone
H-Keystone
Global keystone
Orientations
Back
Menu 9-33
9.11 Horizontal keystone
What can be done ?
The Horizontal Keystone adjustment is used to align the image geometry, this can be necessary when projecting under a non stan-
dard angle.
Image 9-2
Horizontal keystone adjustment
A
Right keystone
B
Left keystone
Depending on the Global keystone setting, the horizontal keystone adjustment is source specific or is global
for all sources.
Avoid using the horizontal keystone function as this result in a loss of resolution. The reason for this keystone
is the inclination of the projector. Check first if it is possible to correct that physically.
68
R5976763 CINEVERSUM 60/70 22042004
Advertisement
Table of Contents
