Packaging And Dimensions; Box Content; Projector Packaging - Barco CINEVERSUM 60 Installation Manual

1. PACKAGING AND DIMENSIONS

Overview
•

Box content

•

Projector Packaging

• Dimensions
1.1 Box content
CEE7
European power plug to connect the power cord to the wall outlet.
ANSI 73.11
American power plug to connect the power cord to the wall outlet.
Content
• 1 CineVERSUM 60 or CineVERSUM 70 projector
• 1 remote control unit RCU + 2 batteries.
• 2 power cables with outlet plug type CEE7 and ANSI 73.11.
• 1 spanner to shift the lens
• 1 owners manual European languages (English, French, German, Italian, Spanish)
• 1 owners manual Asian languages (Chinese, Japanese)
• 1 installation manual
• 1 safety manual multilingual
1.2 Projector Packaging
Way of Packaging
The projector is packed in a carton box. To provide protection during transportation, the projector is surrounded with foam. The
package is secured with banding and fastening clips.
To unpack
1. Pull off the adhesive tape or cut the adhesive tape but take care not to insert the knife too deep otherwise the projector can be
damaged.
2. Take the projector out of its shipping carton, remove the foam rubber and place it on a table. (image 1-1)
R5976763 CINEVERSUM 60/70 22042004
1. Packaging and Dimensions
3