Component Input - Barco CINEVERSUM 60 Installation Manual

3. Connections
How to configure the 5-cable input ?
1. Press ADJ or ENTER to open the Main menu. (menu 3-1)
2. Push the cursor key ↑ or ↓ to select Installation and press ENTER.
The installation menu will be displayed. (menu 3-2)
3. Push the cursor key ↑ or ↓ to select Input slots and press ENTER.
The input slots menu will be displayed. (menu 3-3)
4. Select 5 RCA and toggle ENTER to switch between YUV, RGB and SCART.
Select RGB for the following source types:
- RGBHV
- RGBS
- RGsB
Select YUV for the following source types:
- Component sources
Select SCART for the following source types:
- RGB+Video
Main Menu
Image settings
Advanced settings
Installation
Service
1. PC
2. RGB/Component
3. DVI
4. SVideo
* 5. Video
6. Component
Shutdown
Back
Menu 3-1

3.7 Component Input

Input specifications and locations
The component input section is made of 3 RCA input terminals.
Input signals : Pr, Pb, Ys
0.7Vpp ± 3dB
75 Ω terminated
S-VIDEO
CONTROL
RS232/RS422
ASPECT
SCREEN
RATIO
12V TRIGGER
Image 3-7
Component input
How to select the component input ?
1. Press 6 on the RCU.
Note: Another way of selecting the component input is entering the Main menu and selecting Component.
20
Installation
Input slots
File service
Internal pattern
When no signal
Source transition
OSD configuration
Language
V-Keystone
H-Keystone
Global keystone
Orientations
Back
Menu 3-2
VIDEO INPUT RGB/COMPONENT INPUT
H
VIDEO V
Pr
COMPONENT
DVI INPUT
IN
5 RCA
YUV
Reset single slot
PC
RGB/Component
DVI
SVideo
Video
Component
Reset all slots
All input slots
Back
Menu 3-3
B/Pb
R/Pr G/Y
Pb Y
VGA INPUT
Input slots
R5976763 CINEVERSUM 60/70 22042004