Table of Contents
Advertisement
5. GETTING USED TO THE MENU STRUCTURE
Overview
•
How to start up the menus
•
How to use the menus
•
How to make an adjustment
•
Access Control via a password
5.1 How to start up the menus
Box like menu structure
The menu structure is built up with boxes which allow easy access to different parameters for setting up the projector.
A menu box item can generate at its turn a menu box or it can generate an adjustment box such as a slide bar.
How to activate the menu structure
1. Press ADJ or ENTER on the RCU.
The Main menu box will be displayed. (menu 5-1)
Main Menu
Image settings
Advanced settings
Installation
Service
1. PC
2. RGB/Component
3. DVI
4. SVideo
* 5. Video
6. Component
Shutdown
Back
Menu 5-1
5.2 How to use the menus
How to select an item
1. Use the ↑ or ↓ keys to highlight the desired item. (menu 5-2)
2. Press ENTER to select.
If the selected item has sub menus, this sub menu will open.
If the selected item is an adjustment or selection, the adjustment or selection will be executed.
3. Use the EXIT key to close an adjustment or to return to the previous menu.
Note: The menu will be closed automatically when there is no action on the menu detected about 5 seconds.
4. Use ADJ to quit the menu structure completely from anywhere in the menu tree.
Main Menu
Image settings
Advanced settings
Installation
Service
1. PC
2. RGB/Component
3. DVI
4. SVideo
* 5. Video
6. Component
Shutdown
Back
Menu 5-2
R5976763 CINEVERSUM 60/70 22042004
5. Getting used to the menu structure
31
Advertisement
Table of Contents
