4. GETTING STARTED
Overview
•
Terminology overview
•
Switching on
•
Lamp runtime
•
Switching from operational mode to standby
•
Switching off the projector
•
Temperature error DMD
•
Using the RCU
•
Projector Address
•
Controlling the projector
4.1 Terminology overview
On projector
The controls are situated on the top cover of the projector.
Image 4-1
Ref.
Function
1
Infra red receiver
2
IR reception indication
3
Stand by led
4
Main power switch
R5976763 CINEVERSUM 60/70 22042004
Description
Infra red reception diode for IR signals coming from the Remote control
(RCU
Lights up when a valid IR signal is captured.
•
projector in operational mode: Lights up continuously
•
projector in standby mode: LED, 0.5 sec on, 2 sec off.
•
projector in cooling down mode: LED, 1 sec on, 1 sec off.
When pressed, the projector starts in stand by mode.
4. Getting Started
1
2
3
4
25