File Service; Auto Search; Film Mode - Barco CINEVERSUM 60 Installation Manual

9. Installation menu
The reset be executed without confirmation warning.

9.4 File service

Overview
•

Auto search

•

Film mode

• Color Space
9.4.1 Auto search
What can be done ?
When a not active input is selected, the projector can scan automatically the inputs and display the first active source. When auto
search is off, the projector stays on the selected source and waits until a signal is available.
During the scanning the projector follows priority :
1. PC
2. DVI
3. Video
4. S-Video
5. 5 RCA
6. 3 RCA
How to set up ?
1. Push the cursor key ↑ or ↓ to highlight File service. (menu 9-10)
2. Press ENTER to select.
The File service menu will be displayed. (menu 9-11)
3. Push the cursor key ↑ or ↓ to highlight Auto search.
4. Press ENTER to toggle between ON and OFF.
ON Projector scans for an active source
OFF Projector stays on the selected input
Installation
Input slots
File service
Internal pattern
When no signal
Source transition
OSD configuration
Language
V-Keystone
H-Keystone
Global keystone
Orientations
Back
Menu 9-10
9.4.2 Film mode
What can be done ?
Some sources like common DVD material are derived from cinema 24 Hz sources (2/2 or 3/2 pull down method).
The film mode detection insures that these converted signals are shown without artefacts.
60
File service
Auto search ON
Film mode ON
Color space
Back
Menu 9-11
R5976763 CINEVERSUM 60/70 22042004