HIOS HSV-10RB Instruction Manual page 4

Neji taro v for automatic assembly, hsv-rb series, automatic screw feeder
Table of Contents

Advertisement

Do not disassemble the AC adapter as there is a risk of electric shock, fire or malfunction.
Do not damage, alter or change the power cord. Do not place heavy objects on the cord.
Do not pull hard on the cord or twist the cord as it could be damaged, thereby causing a risk of fire or electric shock.
Do not handle the AC adapter with wet hands as it could cause an electric shock.
When using an outlet with AC100-240 V, don't overload the electrical circuit.
Do not modify or remodel this machine as this may cause a fire or electric shock.
Do not operate this machine near flammable liquids, gasses or materials as there could be a risk of fire or explosion.
Stop operating the machine and unplug the AC adapter from the wall outlet when you detect overheating,
smoke, a pungent odor or any other unusual condition, as there may be a risk of fire or electric shock. Contact
the dealer, from which you purchased the machine and have it examined and repaired.
In the case of a thunderstorm, stop operating the machine, turn off the power and unplug the AC adapter from the wall
outlet. If there is lightning and thunder nearby, move away from the machine and do not touch it or the AC adapter.
After the thunder stops, and when it is safe to do so, check the machine.
If there is any abnormality, contact your dealer.
Attachment of the earth wire
When the earth wire is connected loosen the screw near the
After inserting the U-shaped metal fitting of an attached cable, tighten the screw again.
the bottom of the main body
WARNING
- 3 -
mark once.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents