HIOS HSV-10RB Instruction Manual page 31

Trouble
9-12
The escaper does not rotate when no
screws are present, although the indicator
light is on.
9-13
The escaper rotates in the wrong direction.
9-14
.The escaper continues to
rotate in the wrong direction.
Cause
・Undesired objects blocking front screw
sensor.
・Adjustment of the front screw sensors
is unsuitable.
・When the escaper is operating, some
alien object is preventing the escaper
from rotating smoothly.
・Escaper and the escaper guide do not
fit together.
・The origin sensor may be improperly
adjusted.
- 30 -
Corrective measures
・Make sure there are no debris or other
objects present in the sensor brackets.
・If the escaper or stopper is damaged
or worn-off, parts replacement is
recommended.
・Adjustment on front screw sensors
as shown on P.20
・While the screw lotates, please check
whether it has hit the holding plate.
・If the escaper or escaper guide is
damaged or worn off, replacement is
recommended.
・Shake the screw down through the hole
at the bottom of the machine.