Contents
1. OVERVIEW OF Neji Taro V
2. BEFORE USE ......................................................... 1
1. OVERVIEW OF Neji Taro V for Automatic Assembly Type
Thank you very much for selecting our Automatic Screw Feeder "Neji Taro V for Automatic Assembly Type".
This machine can line up screws (Type M1-M3) and supplies them one by one to increase the efficiency of screwing work.
Different sizes of screws can be used by changing the rail, escaper, passing plate and the robot escaper guide.
It can be used wherever there is a power source for an AC adapter.
2. BEFORE USE
Please check for the following accessories before operating the machine.
*CD-ROM
*AC adapter
*Screwdriver
*Ground wire
1
1 unit
*Hexagonal wrench
1 piece (For adjusting timer)
1 piece
13.
1 piece
- 1 -
.............................................. 24
...................................... 34
35