Go To Ground - GE ADTS542F User Manual

3-24
3.8

Go to ground

Starts the "Go to ground" procedure for all channels. The ADTS takes all channels to ground
pressure. See also section 1.6 "ADTS Touch".
1. To command the controller to take all channels to ground pressure, first touch the "Aircraft
Status" icon.
The new overlay screen shows the current aircraft status.
2. The display shows the current "Rate" at which the aircraft will go to ground (1).
1
3. To change the "Rate":
- Touch the "Rate" window (1), the "Set Rate" panel is displayed.
ADTS542F/552F/553F/554F User Manual
Figure 3-12 Go to ground main screen
K0553 Revision C