GE ADTS542F User Manual page 46

3-12
Adjusts the brightness of the screen displays.
Theme
Changes the screen view from a dark background with white text to a light background with black
text for bright sunlight use.
Volume
Adjusts the volume of the audible indications.
ADTS settings
Opens a sub-menu containing eight items:
• Auto leak recovery: auto leak recovery automatically regains control if the leak rate becomes too
high for any of the control channels. Auto leak operates at pre-set rates of 3000ft/min and
600knots/min.
To turn auto leak recovery On and Off:
1. Touch the auto leak recovery panel inside the white box. When auto leak recovery is On, a
"tick" appears inside the box. If no "tick" is visible, auto leak recovery is Off.
• Pressure units: shows the current selection. To change the pressure units setting:
1. Touch the pressure units panel.
2. Touch the required units radio button. The units radio button panel closes and the pressure
units panel shows the selected units.
• Aero units: shows the current selection. To change the aero units setting:
1. Touch the aero units panel.
2. Touch the required aero units radio button. The aero units radio button panel closes and the
aero units panel shows the selected units.
• Altitude correction: shows the current selection. To change the altitude correction setting:
1. Touch the altitude correction panel, a numbered keypad is displayed.
Note: Enter a positive correction factor when ADTS is below the aircraft reference. Enter a
negative correction factor when ADTS is above the aircraft reference.
2. On the numbered keypad, select the required altitude correction setting.
3. Touch the "Tick" icon, the numbered keypad closes and the new altitude correction setting is
displayed in the altitude correction setting panel.
4. Touching the "Cross" icon, cancels the action and closes the numbered keypad.
• Airspeed mode: shows the current selection. To change the setting:
1. Touch the airspeed mode panel.
2. Touch the required units radio button:
- CAS: selects the Calculated Airspeed mode and closes the airspeed mode panel.
- TAS: opens the True Airspeed sub-panel containing two additional items:
- True Airspeed Temperature: shows the currently selected temperature. To change the
selected temperature setting: touch the True Airspeed Temperature panel. A numbered
keypad is displayed. Use the keypad to enter the new temperature and touch the "tick" icon.
The new temperature is displayed in the True Airspeed Temperature panel and the keypad
closes.
- Temperature units: shows the currently selected temperature units. To change the selected
temperature units: touch the Temperature units panel.
ADTS542F/552F/553F/554F User Manual
K0553 Revision C