Dashboard - GE ADTS542F User Manual

ADTS542F/552F/553F/554F User Manual
2. Switch the ADTS Touch ON.
3. Select "Tools" on the "Dashboard".
4. From the "Tools" menu, select "Bluetooth". The "Bluetooth" sub-menu opens.
5. Select "List of devices". The "Select device" panel opens showing a list of serial numbers for
devices for a connection attempt.
6. If the serial number of the ADTS for connection is not in the list, then close the list by touching
the "cross" icon. Select "New scan for devices". Wait while a search for active devices is
performed.
7. Select the required serial number device from the list and touch the "tick" icon. Wait while
connection is established.
If the link has been successful the "Bluetooth® antenna icon" icon is now displayed in the status
indicator area of the ADTS Touch, see also section 1.6 "ADTS Touch".
Wireless operation of the ADTS is now available. See also, section 3.14 "Bluetooth®".
3.3

Dashboard

The "Dashboard" shows the top-level menu items, which are:
• PITOT STATIC
• EPR
• SETTINGS
• TOOLS
• TEST SEQUENCE
1
3
K0553 Revision C
Figure 3-2 Dashboard
3-3
2
4
5