Aircraft Going To Ground - GE ADTS542F User Manual

3-26 ADTS542F/552F/553F/554F User Manual
5
Figure 3-15 Aircraft going to ground
5. To request all channels to temporarily hold at the current controlled pressure, touch the green
"hand" icon (5). The controller status bar will change from CONTROL to HOLD and the "Hand" will
turn orange. This action will also hold a descent to ground. The HOLD state may be released
either by again touching the orange "hand" icon or by returning to MEASURE mode. The "hand"
will turn green to indicate hold is released.
Figure 3-16 Hold status during go to ground ramp
K0553 Revision C