Safety; Warning - ROBOTIQ Wrist Camera Instruction Manual

2. Safety

Warning

The operator must have read and understood all of the instructions in the following manual before handling the
Robotiq Wrist Camera Vision System for Universal Robots.
The term "operator" refers to anyone responsible for any of the following operations on the Wrist Camera Vision
System:
Installation
l
Control
l
Maintenance
l
Inspection
l
Calibration
l
Programming
l
Decommissioning
l
This documentation explains the various components of the Vision System, as well as general operations regarding the
whole life-cycle of the product from installation to operation and decommissioning.
The drawings and photos in this documentation are representative examples and differences may exist between them and
the delivered product.
2.1. Warning
Note
Any use of the Vision System in noncompliance of these warnings is inappropriate and may cause injury or
damage.
Warning
The Wrist Camera Vision System used in human-robot collaboration must not be considered a complete safety
measure, additional dedicated safety device(s) must be considered. Vision System failure can occur and result in
danger for workers or machinery if not properly secured. See local or international safety measure for human-
robot collaboration.
Warning
©Robotiq inc. 2016-2018
Wrist Camera Instruction Manual
10