Maintenance Test - digicon catrax automatic master Product Manual

6.8.1 Maintenance test

The anti-panic system (drop-arm) was developed to facilitate the exit of people in
emergencies. Thus, as a preventive measure, we recommend regular tests and
inspections in this device (at least once a month). If the mechanism presents any
defect, request maintenance to a Digicon technician or a qualified company.
Each inspection should carry out the following operational sequence for each of the
three arms:
- set the arm on the horizontal position;
· turn the turnstile off;
· check if the arm drops (if the arm does not drop, contact the dealer or Digicon);
· turn the turnstile on;
· raise the arm until it reaches its normal position (the arm must stay in horizontal
position without external support; if it does not, contact the dealer or Digicon);
· repeat the procedure three times for each arm.
33