Setup Menu - ResMed S9 Elite Clinical Manual

Setup menu

The Setup menu consists of:
• Patient Setup menu—allows the patient to optimise comfort settings as well as make changes to
the mask or tube type.
• Clinical Setup menu—allows the clinician to set all parameters and options pertaining to the
patient's therapy.
Patient Setup menu
Only settings relevant to the patient are displayed in the Patient Setup menu. Depending on how the
device has been customised via the Clinical Setup menu, the following screens can be viewed:
+ Clinical Setup menu (Hold for 3 sec)
There are four screens available from the Clinical Setup menu:
• Settings—displays parameters directly affecting the patient's therapy.
• Options—displays parameters affecting the patient's comfort, therapy feedback and compliance
reporting.
• Reminders—displays parameters for accessories requiring replacement.
• Configuration—displays general device setting and resetting options.
Clinical menus are identified by the yellow open lock shown in the top right corner.
Where further options exist on a screen, the blue scroll bar down the right of the screen (present on the
first two screens above) indicates your position within these options.
Clinical Info menu (accessed from the Clinical Setup menu)
EPR Level—displayed if set to PATIENT in the Clinical Setup menu.
Tube—only displayed if ClimateLine or ClimateLine
ClimateLine is attached, no setting is required.
Climate Ctrl—only displayed if ClimateLine or ClimateLine
and also set to PATIENT in the Clinical Setup menu.
Mask—always available.
Mask Fit—always available.
SmartStart—only displayed if set to PATIENT in the Clinical Setup menu.
is not connected. If
MAX
is connected
MAX
17
English