Setup - ResMed S9 Elite Clinical Manual

Setup

1. Align your H5i with your S9 and push them together until they click into place.
2. Connect the DC plug of the power supply unit to the rear of the S9.
3. Connect the power cord to the power supply unit.
4. Plug the other end of the power cord into the power outlet.
5. Connect one end of the air tubing firmly onto the air outlet.
6. Connect the assembled mask system to the free end of air tubing.
Notes:
• Always ensure that the S9 and H5i are placed on a stable, level surface for proper operation.
• Place the power supply unit away from the H5i to allow for adequate ventilation.
10