Data Management; Sd Card; Removing The Card; Inserting The Card - ResMed S9 Elite Clinical Manual

Data management

The SD card may be used to monitor patient usage as well as treatment pressure, mask leak, and
incidence of apnoeas and hypopnoeas. To assess the patient's progress, data for the last session may be
compared to values for the last week, the last month, the last three months, the last six months, and the
last year. The device stores usage and summary data for up to 365 sessions.

SD card

The SD card allows S9 devices
to capture data. The S9 Series
comes with the SD card already
inserted and ready to be used.
Compliance data is also stored
on the device, so if the card is
lost, the data is not. You can also
create new treatment settings
and transfer them to the patient's
device via the SD card.

Removing the card

Before removing the card, instruct the patient to disconnect the S9 device from the power outlet.
Instruct the patient to:
1. Push in the SD
card to release
it.

Inserting the card

1. Remove the card from the protective folder.
2. Push the card into the S9 device until it clicks.
3. The following message is briefly displayed: Reading SD card
Notes:
• For more information on removing and inserting the card refer to the S9 SD Card Protective Folder
provided with the device.
• Ask the patient to retain the S9 SD Card Protective Folder for future use.
2. Remove the 3. Insert the
card.
4. Send the
card into the protective folder
protective back to you as
folder. instructed.
23
English