ResMed S9 AutoSet Welcome Manual
Hide thumbs Also See for S9 AutoSet:

Advertisement

AutoSet
& Elite
POSITIVE AIRWAY PRESSURE DEVICES
Welcome Guide
English

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S9 AutoSet and is the answer not in the manual?

Questions and answers

Summary of Contents for ResMed S9 AutoSet

  • Page 1 AutoSet & Elite ™ ™ POSITIVE AIRWAY PRESSURE DEVICES Welcome Guide English...
  • Page 3 Welcome Thank you for choosing the S9 AutoSet or S9 Elite. Before operating these devices, please read the entire Welcome and Information Guides. DC power inlet Module/Adapter port Air filter SD card slot Air outlet S9 at a glance The S9 system comprises the following elements: •...
  • Page 4 5. Connect the assembled mask system to the free end of the air tubing. Notes: • For more information on assembling your mask see your mask user guide. • Recommended masks are available on www.resmed.com on the Products page under Service & Support.
  • Page 5 S9 basics LCD screen Home menu Start/Stop button Starts or stops treatment. Key: Home Humidity level Ramp Setup menu* Allows you to Heated tube make changes to settings. Climate Info menu* Control Allows you to Start/Stop view your sleep statistics. Push dial Push dial Turning the dial...
  • Page 6 Adjusting ramp time Designed to make the beginning of treatment more comfortable, ramp time is the period during which the pressure increases from a low start pressure to the treatment pressure. To adjust your ramp time: 2. Press 1. From your home 3.
  • Page 7 S9 Essentials S9 Essentials is designed to make device interaction and menu navigation easier for you. If enabled by the clinician, S9 Essentials disables the Info and Setup functionality so that you can simply start and stop therapy and adjust ramp, humidification and Climate Control. Selecting the mask type* To select your type of mask: 1.
  • Page 8 Getting started 1. Make sure the power is connected. 2. Adjust the ramp time if required. 3. Fit your mask as described in your mask user guide. 4. To start therapy, simply breathe into the mask and/or press 5. Lie down and arrange the air tubing so that it is free to move if you turn in your sleep.
  • Page 9 1. Remove the air filter cover from the back of the S9 device. 2. Remove and discard the old air filter. 3. Insert a new ResMed air filter ensuring that it is sitting flat in the air filter cover. 4. Replace the air filter cover.
  • Page 10 S9 SD Card Protective Folder provided with your device. Please retain the S9 SD Card Protective Folder for future use. Notes: • For Troubleshooting information refer to the Information Guide. • For more product information see www.resmed.com.
  • Page 12 WELCOME EUR2 / APAC Manufacturer: ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia. Distributed by: ResMed Corp 9001 Spectrum Center Boulevard San Diego CA 92123 USA. ResMed (UK) Ltd 96 Jubilee Ave Milton Park Abingdon Oxfordshire OX14 4RW UK.

This manual is also suitable for:

S9 elite

Table of Contents