ResMed S9 Series Welcome Manual
Hide thumbs
Also See for S9 Series:
- User manual (129 pages) ,
- Information manual (64 pages) ,
- Clinical manual (37 pages)
Related Manuals for ResMed S9 Series
Summary of Contents for ResMed S9 Series
- Page 1 AutoSet ™ AutoSet for Her ™ Elite ™ Escape Auto ™ Escape ™ POSITIVE AIRWAY PRESSURE DEVICES ™ for Her ™ HEATED HUMIDIFIER Welcome Guide English...
- Page 3 Welcome Thank you for choosing the S9 Series or H5i. Before operating these devices, please read the entire Welcome and Information Guides. DC power inlet Module/Adapter port Air filter SD card slot Air outlet S9 at a glance The S9 system comprises the following elements: •...
- Page 4 Flip lid seal Flip lid Air outlet Release button ClimateLine/ ClimateLine connection port Latch H5i at a glance H5i standard water tub The H5i system comprises the following elements: • H5i heated humidifier • H5i standard water tub. Optional components include: •...
- Page 5 • Place the power supply unit away from the H5i to allow for adequate ventilation. • For more information on assembling your mask see your mask user guide. • Recommended masks are available on www.resmed.com on the Products page under Service & Support.
-
Page 6: Filling The Water Tub
Filling the water tub 1. Slide the latch and lift open the flip lid. 2. Remove the water tub. 3. Fill the water tub (through the center hole) with distilled or deionized water up to the maximum water level mark (380 mL). 4. - Page 7 S9 basics LCD screen Home menu Start/ Stop button Starts or stops treatment. Key: Home Humidity level Ramp Setup menu* Allows you to Heated tube make changes to settings. Climate Control Info menu* Allows you to Start/ Stop view your sleep statistics.
- Page 8 S9 Essentials S9 Essentials is designed to make device interaction and menu navigation easier for you. If enabled by the clinician, S9 Essentials disables the Info and Setup functionality so that you can simply start and stop therapy and adjust ramp, humidification and Climate Control. Adjusting humidity level Ranging from OFF to 6, you can adjust the humidity level at any time to find the setting that is most comfortable for you.
-
Page 9: Using Mask-Fit
Adjusting ramp time Designed to make the beginning of treatment more comfortable, ramp time is the period during which the pressure increases from a low start pressure to the treatment pressure. To adjust your ramp time: 2. Press 1. From your HOME 3. -
Page 10: Selecting The Mask Type
Selecting the mask type* To select your type of mask: 1. Press . The SETTINGS 2. Turn until Mask is 3. Press . The selection is screen is displayed. displayed in blue. highlighted in orange. 4. Turn until the mask 6. -
Page 11: Getting Started
Getting started 1. Make sure the power is connected. 2. Adjust the ramp time or humidification level if required. 3. Fit your mask as described in your mask user guide. 4. To start therapy, simply breathe into the mask and/or press 5. -
Page 12: Cleaning And Maintenance
Cleaning and maintenance You should regularly carry out cleaning and maintenance as described in this section. Disassembling the water tub 1. Slide the latch. 2. Lift open the flip lid. 3. Remove the water tub. 4. Discard any excess water from the water tub. 5. - Page 13 Replace the air filter every six months (or more often if necessary). 1. Remove the air filter cover from the back of the S9 device. 2. Remove and discard the old air filter. 3. Insert a new ResMed air filter ensuring that it is sitting flat in the air filter cover.
- Page 14 S9 SD Card Protective Folder provided with your device. Please retain the S9 SD Card Protective Folder for future use. Notes: • For Troubleshooting information refer to the Information Guide. • For more product information see www.resmed.com.
- Page 16 For patent information, see www.resmed.com/ip. S9, AutoSet, S9 AutoSet, S9 Escape, S9 Elite, S9 Escape Auto, H5i, SlimLine and ClimateLine are trademarks of ResMed Ltd and S9, AutoSet, Escape, SlimLine and ClimateLine are registered in U.S. Patent and Trademark Office.