Cleaning And Maintenance; Disassembling The H5I; Daily; Monthly - ResMed S9 Elite Clinical Manual

Cleaning and maintenance

You should regularly carry out cleaning and maintenance as described in this section.

Disassembling the H5i

1. Slide the latch.
2. Lift open the flip lid.
3. Remove the water tub.
4. Discard any excess water from the water tub.
5. Unclip all four side latches.
6. Pull apart the tub lid, plate and base.

Daily

1. Disconnect the air tubing and hang it in a clean, dry place until next use.
2. Wash the disassembled tub lid, plate and base in warm water using a mild detergent.
3. Rinse thoroughly in clean water and allow them to dry away from direct sunlight.
Notes:
• The disassembled tub lid, plate and base may also be washed in a dishwasher on the delicate or
glassware cycle (top shelf only).
• Do not hang the air tubing in direct sunlight as it may harden over time and eventually crack.
• Do not wash the air tubing in a washing machine or dishwasher.

Monthly

1. Wipe the exterior of the S9 and H58 with a damp cloth and mild detergent.
2. Peel the flip lid seal from the flip lid and wash it in warm water using a mild detergent.
3. Check the air filter for holes and blockage by dirt of dust. Replace the air filter if necessary.
25
English