Oki OKIFAX 5400 Handbook page 97

8 Press the Yes key. The display shows
BROADCAST/MEMORY TX
9 Press the Yes key.
The display shows
BROADCAST/MEMORY TX.
Press the Yes key.
10 Select a location. Refer to the instructions below.
• To select a One Touch key, press the One Touch key
(lift the main One Touch keypad to access One Touch
keys 16–30).
• To select an Auto Dial number, press the Auto Dial key,
then enter the two-digit Auto Dial number on the
numeric keypad.
• To select a number dialed on the numeric keypad, dial
as you would on a normal telephone.
• To select a group, use the numeric keypad and press the
# key. Then, enter the number of the group you want to
use.
11 Press the Yes key to confirm your selection. The display
shows
SELECT LOCATION(S).
12 To continue selecting locations, repeat Steps 11 and 12 as
often as necessary.
13 When you are finished selecting locations, press the No
key [when the SELECT LOCATION(S) message is
displayed].
14 If you have selected multiple locations, the unit will ask
you if you want to confirm your selections with a printed
report before proceeding.
• If you do, press the Yes
printed, the display shows BEGIN SCANNING?
• If you want to make corrections, press the No
and go back to Step 9.
• To remove a location, select the location in the same
way, but press the No
transmission.
key. After the report is
key
key to delete it from your
Handbook
|
97