Service Function Settings; Service Function Settings List; Changing Your Service Function Settings - Oki OKIFAX 5400 Handbook

Changing Your Dial Parameter Settings
1 Press the Select Function key.
2 Press the 9/User Program One Touch key.
3 On the numeric keypad, press 2. The display shows
2:DIAL PARAMETER.
4 Press the Yes key until the display shows the dial
parameter you want to change.
5 Repeatedly press the No
appears in the display.
6 Press the Yes key to confirm your selection. The name
of the next dial parameter setting appears in the display.
7 Press the Select Function key to finish.

Service Function Settings

In many cases, service function settings greatly change the
way your fax machine operates. To change any of these
settings, contact your Authorized OKIFAX Dealer.
key until the setting you want

Service Function Settings List

1 LONG DOC. SCAN
Normally fax machine does not scan documents longer
than 14 inches (360 mm). When this function is on, your
fax machine can scan and transmit documents of any
length for up to one hour.
2 MDY/DMY
This function specifies how fax machine displays and
prints the date: month/day/year or day/month/year.
3 TIME/DATE PRINT
This function specifies how the time and date are printed
on the fax messages you transmit. Available settings are:
do not print date and time, print date and time at the top of
the first page only, and print date and time at the top of
every page.
4 TSI PRINT
When this function is on, the phone number of the
sending fax machine prints at the top of each page of the
message.
5 NO TONER MEM.RX
When this function is on, your fax machine automatically
receives messages in memory when it is low on toner.
|
Handbook 53