Changing Your User Function Settings - Oki OKIFAX 5400 Handbook

22 PC/FAX SWITCH
This function is active only when the optional PC
interface is installed and your fax machine is set to the PC
Fax answering mode. In that case, incoming faxes are
saved directly to the PC's disk without being printed. If
the PC is turned off or not functioning, the fax machine
acts as a stand-alone fax machine and prints incoming
faxes when this PC/FAX SWITCH function is set to ON
(default). If this function is set to OFF, the fax machine
will not accept incoming faxes when the PC is turned off
or not functioning.
23 ONE TOUCH PARAM
This function allows you to activate the Echo Protection
feature for a specific One Touch key, without changing the
normal settings. Echo Protection can improve
communication with a location in a noisy telephone area.
For instructions on changing One Touch Parameters
settings for a One Touch key, refer to the "Programming
Your Speed Dial directory, One Touch Faxing" section of
this handbook.
|
160 Handbook

Changing Your User Function Settings

1 Press the Select Function key.
2 Press the 9/User Program One Touch key.
The display shows
1:FUNC. PROGRAMMING.
3 Press the Yes key. The display shows
FUNCTION NO. [ ].
4 Using the numeric keypad, enter the 2-digit number of the
function you want to change. The display shows the name
of the selected function.
5 Repeatedly press the No
appears in the display.
!
If you are changing the TX MODE DEFAULT settings,
the new settings appear on the lights above the Yes
and the No keys
6 Press the Yes key to confirm your selection. The name
of the next function setting appears in the display.
7 Press the Select Function key to finish.
key until the setting you want