Cmos Camera Connector (Cn17) - Renesas RTK79210**B00000BE User Manual

RZ/A2M SUB Board RTK79210XXB00000BE
3.1.11

CMOS Camera Connector (CN17)

RTK79210XXB00000BE is equipped with a CMOS camera connector (CN17).
Figure 3.1.14 shows the CMOS camera connector pin layout diagram, and Table 3.1.15 shows the CMOS camera
connector pin layout.
CMOS camera connector (CN17) does not have a reverse insertion prevention guide, so be sure to insert in the
direction of the #1 pin during connection. Moreover, confirm that the camera device signal pin is compatible with the
circuit board.
Figure 3.1.14 CMOS Camera Connector (CN17) Pin Layout Diagram
Table 3.1.15 CMOS Camera Connector (CN17) Pin Layout Table
Pin
1 Vcc (+3.3V)
3 SCL (PD_6 / RIIC3SCL)
5 VSYNC (P6_2 / ET0_TXD0/RMII0_TXD0 /
VIO_VD)
7 PCLK (P6_1 / ET0_TXEN/RMII0_TXDEN /
VIO_CLK)
9 D7 (PE_1 / ET0_RXD0/RMII0_RXD0 / VIO_D7)
11 D5 (PE_3 / ET0_RXER/RMII0_RXER / VIO_D5)
13 D3 (PE_5 / ET0_MDC / VIO_D3)
15 D1 (PH_0 / VIO_D1)
17 GND (Vss)
19 I/O (PG_4 / VIO_D15)
D15 (PG_4 / VIO_D15)
21 D13 (PG_6 / VIO_D13)
23 D11 (PG_3 / VIO_D11)
25 D7 (PG_1 / VIO_D9)
[Note] Red characters indicate functions in use.
R20UT4398EJ0100 Rev.1.00
2018.10.11
C side top view
Signal name
CN17
1 2
25 26
Pin
2 GND (Vss)
4 SDA (PD_7 / RIIC3SDA)
6 HSYNC (P6_3 / ET0_TXD1/RMII0_TXD1 /
VIO_HD)
8 XCLK
10 D6 (PE_2 / ET0_RXD1/RMII0_RXD1 / VIO_D6)
12 D4 (PE_4 / ET0_CRS/RMII0_CRSDV / VIO_D4)
14 D2 (PE_6 / ET0_MDIO / VIO_D2)
16 D0 (PH_1 / VIO_D0)
18 I/O (PE_0 / ET0_RXCLK/REF50CK0 / VIO_FLD)
20 I/O (PG_5 / VIO_D14)
D14 (PG_5 / VIO_D14)
22 D12 (PG_7 / VIO_D12)
24 D10 (PG_2 / VIO_D10)
26 D8 (PG_0 / VIO_D8)
3. Operating specifications
Signal name
3-20