Setting Method For Standard Depression Strokes - Brother S-7300A Service Manual

7. ADJUSTMENTS

7-12. Setting method for standard depression strokes

Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet
before opening the face plate of the control box. Touching areas where high voltages are present can result in
severe injury.
Use the following procedure to set the operating positions for the depression stroke.
1
(While pressing the menu key and the home key, turn on the power
switch.)
2
(Touch "Treadle position adjustment".)
3
Memorizing the maximum forward position
(With the treadle depressed to the maximum forward position,
touch the OK button on the LCD panel.)
4
Memorizing the neutral position
(With your foot released from the treadle, touch the OK button
on the LCD panel.)
5
Memorizing the maximum backward position
(With the treadle depressed to the maximum backward position,
touch the OK button on the LCD panel.)
6
The display will automatically
return to the adjustment menu.
139
DANGER
ON
The adjustment menu will be displayed
in the LCD panel.
The current voltage from the treadle unit will be
displayed in the LCD panel.
The next treadle depression position will be
displayed on the LCD panel.
The next treadle depression position will be
displayed on the LCD panel.
The buzzer will sound and the LCD panel
display will show that the setting is completed.
Turn off the power switch to exit from the adjustment
menu.
S-7300A
1064D
1064D
OFF