Brother S-7300A Service Manual page 29

Error processing settings (600 to 699)
No. Setting range
650 OFF
2～30
(seconds)
651
1～30
(minutes)
(minutes)
Maintenance settings (700 to 799)
No. Setting range
750
0～99
Specifications and destination settings (800 to 899)
No. Setting range
850
0～2
851 ON/OFF
852 ON/OFF
(*8) For China: 0
For Japan: 2
For other than the above: 1
(*9) For other than Europe and America: OFF
For Europe and America: ON
Initial
Setting
value
units
OFF 1
Timing until busser stop when error occur
OFF: No stopping for Buzzer sound
2 to 30: Buzzer sound stops after specifying time
3 1 Continuous running mode for preventing sewing motor will be over heated
1 - 30 : After continuous operation for the set length of time, operation
Initial
Setting
value
units
0 1 Machine ID code
The destination folder for data storage on USB media is
¥BROTHER¥ISM¥ISMDF**¥
・This is not initialized during initialization mode.
Initial Setting
value
units
(*8) 1 Language
0: Chinese
1: English
2: Japanese
・This is not initialized during initialization mode.
(*9) - PRE foot operation by treadle
ON: Europe specifications
OFF: Other than Europe and America
・This is not initialized during initialization mode.
(*9) - Presser foot down when treadle forward 1st step
ON: depends on MSW-057 setting
OFF: Disabled
・This is not initialized during initialization mode.
stops and [E190] is displayed.
Set by MSW-001, MSW-055
After T/T, when treadle is retuned to neutral, PRE foot is up.
Presser foot lowering when machine motor stops with the presser
foot in the raised position, and then the presser foot is lowered and
the treadle is then moved to the neutral position
S-7300A
3. FUNCTION SETTINGS
Setting details
Setting details
Setting details
18