Adjusting The Presser Foot Floating Amount (Minute Lifting Amount) (Option) - Brother S-7300A Service Manual

Single needle direct drive lock stitcher with electronic feeding system and thread trimmer
Hide thumbs Also See for S-7300A:
Table of Contents

Advertisement

7. ADJUSTMENTS
7-9. Adjusting the presser foot floating amount (minute lifting amount)
(option)
Raise
Lower
131
When sewing stretch materials and materials with long pile,
2307M
you can make minute adjustments to the floating amount for
the presser foot (1) in accordance with the material.
1.
Turn the sewing machine pulley by hand to move the feed
dog (2) below the needle plate (3).
2.
Use the lifting lever to lower the presser foot (1).
3.
Remove the screw (4), and then replace the adjustment
screw set (5) (option SB6564).
4.
Turn the adjusting screw (6) to adjust the floating amount.
Floating amount
5.
Tighten the nut (7).
*
After making the adjustment, sew a piece of material to
check the floating amount.
0922D
S-7300A
To raise the presser foot (1)...Turn the adjusting screw
(6) clockwise.
To lower the presser foot (1)... Turn the adjusting
screw (6) counterclockwise.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents