Securam ProLogic L66 Operation Instructions Manual page 6

ProLogic L66
Step 3: The display will prompt you to enter a valid code. Enter the Super Code (ID00) only .
This function is not available to Manager Codes ID01 or ID02. The "Select Menu" message will
be displayed as follows:
Step 4: Scroll  and  to the menu selection "PW L – 6; Users – 10" and Press OK
Step 5: The LCD will display a warning followed by "Delete All Users?", press OK to confirm.
All users have been deleted.
IMPORTANT: The LCD will advise if a reset is required to finalize the programming. If required, follow
the Mechanical Reset procedure outlined in 15.4 Mechanical Reset.
The code length will now be 6 digits and the total available users will be 10.
The Super Code ID00 will now be 1-1-1-1-1-1
The Manager Code ID01 will now be 1-2-3-4-5-6
2.2 PW L – 8; Users – 30
NOTE: This operation must be performed with the safe door open and with access to the back of the
lock, as a mechanical reset must be performed during this programming sequence.
Step1: Press the Menu/OK button.
Step 2: Using the  and , scroll to the System Menu and Press Menu/OK.
Step 3: The display will prompt you to enter a valid code. Enter the Super Code (ID00) only .
This function is not available to Manager Codes ID01 or ID02. The "Select Menu" message will
be displayed as follows:
Operation Instructions
6