Omron V530-R160E User Manual page 225

@ BL
Function • • • Loads the image data from the host to the V530-R160.
Send
@ B
For <Memory number>, set a controller memory number in the range 00 to 35.
Example: To load to memory number 3:
BL 03
Command executed correctly:
Receive
<Header>
Command not executed correctly:
<Header>
The data transfer is performed with XMODEM (-CRC or SUM) or ZMODEM protocol.
The XMODEM (-1K) protocol is not supported.
The V530-R160 sends the character string "READY" to the host device when the V530-R160 has
completed its initialization. Wait for the "READY" string to be received at the host device before start-
ing the data transfer.
@ BS
Function • • • Saves the image data from the V530-R160 to the host.
Send
@ B
For <Memory number>, set a controller memory number in the range 00 to 35.
Example: To save memory number 3:
BS 03
Command executed correctly:
Receive
<Header>
Command not executed correctly:
<Header>
The XMODEM (-1K) protocol is not supported.
L <Memory number>
O K <Footer>
E R
<Footer>
S <Memory number>
O K <Footer>
E R <Footer>
Communication with the Host
<Footer>
<Footer>
SECTION 8
V530-R160
223
Operation Manual