Omron V530-R160E User Manual page 136

SECTION 5
Setting Reading Conditions
The Pattern registration confirmation screen will be
displayed.
12.
Press the ENT Key.
The setting will be registered and the screen in
will return.
13.
Press the ESC Key four times.
The Monitor mode screen will return.
14.
Press the TRIG Key to perform teaching.
If the result of teaching is OK, the Symbol color,
Right & Left reverse, and Version information are
displayed, and the pattern is registered.
Repeat these steps to register multiple patterns.
If the result of teaching is NG, go to the
screen in
pattern, adjust the camera focus, lighting,
and so on, then carry out pattern registra-
tion again.
V530-R160
134
Operation Manual
3.
(pattern list screen), delete the
5.