Omron V530-R160E User Manual page 179

The interface selections will be displayed.
5.
Select Parallel.
The Parallel I/O monitor screen will be displayed.
Display Details
Display
TRIG A
TRIG B
TRIG C
TRIG D
RUN
ERR
OK/NG
BUSY
GATE
ALARM
6.
Press the ESC Key to leave this screen.
5.
The screen in will return.
Displays the input status for each signal from the host device to the V530-
R160.
Displays the output status for each signal from the V530-R160 to the host
device.
These displays can be changed to ON/OFF or 0/1 even if readings are not exe-
cuted. Move the cursor to the display item. The display will be changed each
time the ENT Key is pressed.
Other Functions
Meaning
SECTION 6
V530-R160
177
Operation Manual