Changing Test Character String and Echo Back
1.
Display the Serial I/O monitor screen and press the SHIFT + ESC Keys.
The detailed setting screen will be displayed.
2.
Select ON or OFF for Echo back.
3.
Move the cursor to the square brackets [ ]
and press the ENT Key.
The software keyboard will be displayed.
4.
Change the test string. Up to 12 characters
can be inserted.
5.
Select END and the screen in
6.
Move the cursor to End and press the ENT Key.
The Serial I/O monitor screen will return.
2.
will return.
SECTION 6
Other Functions
V530-R160
175
Operation Manual