Service Information; Error Codes - Quadra-Fire MT VERNON Owner's Manual

f. Elevation
ELEVATION allows you to adjust the appliance to your
specific elevation. Press the UP/DOWN buttons to
select your elevation. The message in the center will
change between NORMAL and HIGH. If you select
HIGH, it will replace the normal fuel tables with specific
high fuel tables. You MUST select a fuel type after
selecting HIGH.
Please note that changing the elevation will delete any
custom or new fuel table loaded into the appliance.
You must confirm your choice on the CONFIRM
ELEVATION CHANGE screen. This allows you to
reverse your decision if necessary (Figure 23.1).
ELEVATION
Over 4000 FT
Normal / High
Up to 4000 FT
DONE
Figure 23.1
g. Convection Blower Speed
CONV BLOWER SPEED allows you to adjust the
blower speed to your individual preference. Press the
UP/DOWN buttons to select your blower speed. The
message in the center will change between NORMAL
and QUIET.
NORMAL allows the convection blower to reach
maximum RPM at 135 degrees and QUIET at 165
degrees.
CONV BLOWER SPEED
Normal / Quiet
Figure 23.3
h. Language Selection
LANGUAGE allows you to select from four different
languages. To select a language scroll down to the
last item on the USER SETTING screen using the
DOWN button. Using the UP/DOWN buttons select the
preferred language and then press Select and then
press Done.
LANGUAGE
DONE
Figure 23.4
August 13, 2018
CONFIRM ELEVATION CHANGE
Changing elevations will
delete any custom or
new fuel tables loaded into
the stove.
Are you sure?
YES
NO
Figure 23.2
Normal
Quiet
DONE
Anglais
Français
Norvégien
Suédois
SELECT
F. Service Information
The SERVICE INFORMATION screen displays contact
information for Hearth & Home Technologies Customer
Service Line. The local dealer may have changed this upon
or before the installation to indicate a dealer hot line.
www.quadrafire.com
to locate your nearest
DONE
Figure 23.5
G. Error Codes
If a system error occurs that forces the system to stop
operating an error screen appears. Depending upon the
error type, up to three retry attempts are allowed after
which a service professional is required.
Press the ERROR LIST button to display the latest error.
See page 27 for a list of error codes.
7036-187M
MT. VERNON AE INSERT
dealer
ERROR LIST
23