Table of Contents
Advertisement
INSTALLER: Leave this manual with party responsible for use and operation.
OWNER: Retain this manual for future reference.
NOTICE:
DO NOT discard this manual!
Model(s):
EPA CERTIFIED WOODBURNING
FIREPLACE
Installation and service of this appliance should be performed by
qualified personnel. Hearth & Home Technologies recomends HHT
Factory Trained or NFI certified professionals.
Owner's Manual
Care and Operation
Quadra-Fire • Pioneer-II-C Owner's Manual • 4184-900 • Rev C • 02/20
R
WARNING: If the information in these
instructions is not followed exactly, a fire
or explosion may result causing property
damage, personal injury, or death.
• DO NOT store or use gasoline or other flam-
mable vapors and liquids in the vicinity of this
or any other appliance.
• DO NOT overfire. Overfiring will void your
warranty.
• Comply with all minimum clearances to com-
bustibles as specified. Failure to comply may
cause house fire.
• CAREFULLY SUPERVISE children in same room as
fireplace.
• Alert children and adults to hazards of high temperatures.
High temperatures may ignite clothing or other flammable
materials.
• Keep clothing, furniture, draperies and other flammable
materials away.
Pour demander un exemplaire en
français de ce Manuel
du propriétaire, visitez www.quadra-
fire.com/translations.
WARNING
HOT SURFACES!
Glass and other surfaces are hot during
operation AND cool down.
Hot glass will cause burns.
• DO NOT touch glass until it is cooled
• NEVER allow children to touch glass
• Keep children away
WARNING
Fire Risk.
For use with solid wood fuel only.
Other fuels may overfire and generate poisonous
gases (i.e. carbon monoxide).
*P4184-900*
4184-900
1
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Quadra-Fire Pioneer-II-C
Summary of Contents for Quadra-Fire Pioneer-II-C
-
Page 1: Care And Operation
Factory Trained or NFI certified professionals. WARNING Fire Risk. For use with solid wood fuel only. Other fuels may overfire and generate poisonous gases (i.e. carbon monoxide). *P4184-900* 4184-900 Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 2: Table Of Contents
A. Service Parts 5. Burning Process B. Contact Information 6. Dirty Glass 7. Creosote Formation 8. Opacity D. First Fire E. Lighting Instructions/Establish Coal Bed F. Frequently Asked Questions Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 3: Welcome
U.S. ENVIRONMENTAL PROTECTION AGENCY - Certified to comply with 2020 particulate emission standards using cord wood. 4184-990A This wood heater was found to have an average emissions rate of 2.0g/hr using method ASTM E3053-17. Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 4: Limited Lifetime Warranty
(engine, inner cover,access cover and fireback) None 1 Year All replacement parts beyond warranty period See conditions, exclusions and limitations on the next page Page 1 of 2 4021-645K 1/20 Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... - Page 5 OTHER THAN THE WARRANTY SPECIFICED HEREIN. THE DURATION OF ANY IMPLIED WARRANTY IS LIMITED TO DURATION OF THE EXPRESSED WARRANTY SPECIFIED ABOVE. 4021-645K 1/20 Page 2 of 2 Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20...
-
Page 6: Product Specific Information
It is against federal regulations to operate this wood heater in a manner inconsistent with operating Quadra-Fire is a registered trademark of Hearth & Home instructions in this manual. Technologies. Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 7: Important Safety And Operating Information
State of California to Clear Space Sides of Fireplace cause birth defects or other reproductive (from the FP opening) harm. For more information go to: www. P65Warnings.ca.gov. Figure 3.1 Clear Space Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 8: Firebrick
• overload with wood • burn trash or large amounts of scrap lumber • permit too much air to the fire (leaving the door open) Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 9: General Operating Parts
The outside air control is located in behind the access Bottom Access Panel panel. Automatic Combustion Air Control handle Figure 3.3 General Operating Parts (ACC) Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 10: Automatic Combustion Control (Acc)
To close down the air supply for an over-fire situation or to slow the burn rate down im- Figure 3.6 Outside Air Control Handle mediately, slide the linkage to the left. See Figure 3.5. Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 11: Glass Doors
The fan tends to cool off the fireplace. Leave fan off until the burn is well established; then, if you wish, turn the fan on at a low rate. Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 12: Hardwood Vs. Softwood
Air dry to a moisture content of around 20% • Alder - Soft wood - about nine months - Hard wood - about eighteen months NOTICE: Seasoning time may vary depending on drying conditions. Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 13: Storing Wood
You may lively hot coals remain in order to rekindle the next load notice an industrial odor the first few fires. This is considered of wood. normal. Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 14: Lighting Instructions/Establish Coal Bed
For best results, use a hand held homeowner-type gas torch to light the paper and wood for approximately one minute. Figure 3.22 Loading Wood Figure 3.21 Placing Kindling Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... - Page 15 NOTE: The ACC should only need to be activated when starting from a cold start or if a lively coal bed isn’t pres- ent when reloading. Figure 3.27 Door Fully Closed Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20...
-
Page 16: Frequently Asked Questions
• Combustible materials may ignite. wood. May result in illness or possible death. NOTE: Home owners are encouraged to provide smoke and carbon monoxide detectors in accordance with the authority having jurisdiction. Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 17: Maintenance And Service
• condition of door, surrounds and fronts • condition of glass and glass assembly • obstructions of combustion and ventilation air • obstructions of termination cap Clean: • glass • air passageways, grilles Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 18: Creosote (Chimney) Cleaning
Termination Caps Remove 2 screws from the front and back and lift the top off. TCT375 Terra Cotta Termination Cap Figure 4.1 Chimney & Termina- tion Cap Cleaning Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 19: Care And Cleaning Of Plated Surfaces
If the bill is easily removed, the gasket needs adjustment or replacement to create an even seal all around door. It may be necessary to adjust or tighten the door latch. Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 20: Replacement Maintenance
Hinge Retainer Black Washer Door Handle Latch Cam Latch Cam Key Lock Nut Fiber Handle Glass Retainers Spacing Washers Glass w/ Gasket Figure 4.2 Door Handle Assembly Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 21: Door Handle Assembly
Install side bricks. Slide top of brick under clips on side of firebox and push the bottom of the brick until it is flush with the side of the unit. • Lay bottom bricks in unit. Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 22: Baffle Removal And Installation
5. Pull the two (2) piece baffle board and insulation down and out of the fireplace. See Figure 4.7. Screws (4) Figure 4.10 Pry Open Access Door Figure 4.7 Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 23: Timer Assembly Replacement
Figure 4.16 Removal of Air Chamber Cover 5. Lift the fan up and off of the locating pins and remove up through the access hole. See Figure 4.14. Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... - Page 24 8. Install the new air chamber using the 1/4-20 bolts making sure the gasket is installed also. See Figure 4.22. 1/4-20 Bolts Gasket Figure 4.19 Location of Bolts Figure 4.22 Install New Air Chamber Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20...
-
Page 25: Timer Removal And Replacement
2. Remove the two (2) screws in the cover. See Figure 4.26 and pull it down and off. See Figure 4.27. Screws Figure 4.29 Removal of Screws Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... - Page 26 9. • Place linkage control arm over timer shaft and Figure 4.35 Screw Timer to Air Chamber tighten set screw, Figure 4.33. Tighten set screw Linkage control arm Figure 4.33 Linkage Control Arm Installed Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20...
-
Page 27: Fan Snap Disc
Spacer #8 1/4D 7/32L ZN in the fireplace. See Figure 4.38. HHSS #10 x 1/4D 1/4 L BK NOTE: Remember to reattach the wires. Wires Bolt Figure 4.38 Snap Disc Replacement Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 28: Troubleshooting
Be sure you have air available for combustion and that your firewood is dry and well seasoned. Build your fires properly and according to the instructions given in op- Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... - Page 29 Creosote buildup in flue? Air register from furnace near fireplace? Doors opening and closing? Outside air Window closed Combustion closed? for start-up? air control Figure 5.1 Factory-built Fireplaces: Troubleshooting Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20...
-
Page 30: Troubleshooting Table
• Insufficient fuel for fire/heat required Fan doesn’t come on • No power • Fireplace is not hot enough to activate snap disc • Snap disc may be faulty Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... -
Page 31: Reference Materials
A. Service Parts ► PIONEER-II-C Service Parts Beginning Manufacturing Date: Dec 2019 Woodburning Fireplace Ending Manufacturing Date: Active 13.1 13.2 13.3 Part number list on following page. 02/20 Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20... - Page 32 Front Access Lower Grille Assembly SRV4184-076 Blower Assembly Qty 2 req SRV433-5890 Fan Speed Control SRV7000-143 Wire Harness SRV480-0990 Snap Disc, F180F-30 SRV4021-827 Additional service part numbers on following page. Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20...
- Page 33 Rope, 1/2 Wire Jacket 10 Ft 7000-811/10 10.5 Glass Retainer, Bottom Qty 2 req SRV4181-120 10.6 Glass Retainer, Top Qty 2 req SRV4181-121 Additional service part numbers on following page. Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20...
- Page 34 Pkg of 25 220-0080/25 Screw, HWH MS 1/4-20 x 3/4 Pkg of 25 220-0030/25 Screw, PH 8-32 x 1/2 Pkg of 24 28758/24 Washer, 1/4 SAE (for door) Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20...
- Page 35 This page intentionally left blank. Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20...
-
Page 36: Contact Information
This product may be covered by one or more of the following patents: (United States) 5613487, 5647340, 5890485, 5941237, 6006743, 6019099, 6053165, 6145502, 6374822, 6484712, 6601579, 6769426, 6863064, 7077122, 7098269, 7258116, 7470729, 8147240 or other U.S. and foreign patents pending. 2000-945C Quadra-Fire • Pioneer-II-C Owner’s Manual • 4184-900 • Rev C • 02/20...