Quadra-Fire MT VERNON Owner's Manual page 21

4. Program (7 Day Programming)
The wall control is already programmed at 68oF for all time
settings. It will remain there until it is re-programmed.
The wall control can be programmed as a setback
thermostat. Each day of the week has four program
periods. The wall control menus have some features
that make it easy to program groups of days alike. This
minimizes the number of steps required to program the wall
control for most applications.
FUEL SELECTION
Corn
Utility Pellet
Softwood Pellet
Sunflower Seeds
Wheat
Hardwood Pellet
DONE
Figure 21.1
To access the programming screen, select Program from
the menu screen and then select the desired programming
range from the PROGRAMMING RANGE screen.
PROGRAMMING RANGE
Full Week
Mon-Fri
Sat-Sun
Monday
Figure 21.2
a. Full Week
NOTE: It is important to note that the most recent
programming entry will override all previous
programming for an individual day or range of
days.
The small triangle on the left side indicates the current
active programming line (Figure 21.3). For each of the four
intervals available to program there are three adjustable
values: set hour, set minutes and set temperature. You will
need to increase or decrease the hour to change from AM
to PM.
When the screen is first entered the "Wake Hour" is
highlighted. Use the UP/DOWN buttons to adjust the hour
to the desired hour and press the button under "Set/Next".
The highlight will move to the minutes display. Adjust the
minutes and press "Set/Next." The highlight is now on the
temperature value. Set the desired temperature for the
Wake period and press "Set/Next."
The highlight is now on the hour display for the Day period,
and the triangle has moved to the second line. Continue
programming each value as desired. (To store the final
value be sure to press "Set/Next" to return the highlight to
the first value on the screen.)
August 13, 2018
SELECT
7036-187M
When you are finished making changes, or if you just
entered the programming screen to view the set program,
press "Done" or let the display return to the main screen
automatically.
PROGRAM: Full Week
Wake: 6:30 AM 68 F o
Day: 7:59 AM 68 F
o
Evening: 4:00 PM 68 F
o
Night: 11:00 PM 68 F o
DONE SET/NEXT
Figure 21.3
PROGRAM: Full Week
Wake: 6:30 AM
Day: 7:59 AM 68 F
Evening: 4:00 PM 68 F
Night: 11:00 PM 68 F
DONE
Figure 21.5
5. Set Day/time
a. Set Day/Time
In order for the setback function to work properly the
wall control must be aware of the current time. The
SET DAY/TIME screen is used to set the system clock.
When the screen is entered the day of the week is
highlighted.
Use the UP/DOWN buttons to change this to the
current day of the week. Press the button under "Set/
Next" and the highlight will be moved to the current
hour field. Again, use the UP/DOWN buttons to set this
to the current hour. Press the "Set/Next" button again
and the current minute display is highlighted.
Use the UP/DOWN buttons to adjust to the correct
minutes and press "Set/Next" one last time. The
highlight will move back to the original day of week
display.
10 47
Wednesday
DONE
SET/NEXT
Figure 21.6
Wednesday
Figure 21.8
MT. VERNON AE INSERT
PROGRAM: Full Week
o
Wake: 6:30 AM 68 F
Day: 7:59 AM 68 F
o
Evening: 4:00 PM 68 F
o
Night: 11:00 PM 68 F
o
SET/NEXT
DONE
Figure 21.4
o
68 F
o
o
o
SET/NEXT
10
47
Wednesday
Figure 21.7
10 47
21