Quadra-Fire MT VERNON Owner's Manual page 20

MT. VERNON AE INSERT
To temporarily override the programming, use the UP
and DOWN buttons only and do not press the HOLD
TEMP button. The display will show how long the new
temperature will hold before it returns to the next scheduled
programming (Figure 20.1).
Buttons
Figure 20.1 Function Buttons
Figure 20.2
2. Auto / Manual / Off Selection
a. Automatic
In the AUTOMATIC cycle the wall control will turn
the appliance on and off automatically and also
turns the heat output level up or down depending on
the temperature setting. The further away the room
temperature is from the set temperature, the higher the
heat output.
Figure 20.4
b. Manual
In MANUAL cycle, the heat output remains the same
regardless of the difference between the set and room
temperatures. The wall control will function as a simple
on/off thermostat. When the system is set to MANUAL
the HEAT OUTPUT selection is added in the lower right
corner.
Press the button under this selection to access this
feature. The HEAT OUTPUT screen is used to set the
level of heat produced whenever the wall control calls
for heat (Figure 16.3). The HEAT OUTPUT screen is
not accessible in AUTOMATIC cycle.
20
Up
Down
SET COMFORT LEVEL
74
ºF
ON HOLD
DONE RESUME
Figure 20.3
AUTO/MANUAL SETTINGS
Automatic
Manual
Off
Figure 20.5
Figure 20.6
c. OFF
This selection turns the appliance off. When the
appliance is set to OFF, it will not light regardless of
room temperature. Use this setting when cleaning and
maintaining your appliance.
Figure 20.7
3. Fuel Type
The FUEL TYPE screen is used to select the fuel that will
be used with the pellet system. The list on this screen
indicates all fuel choices available to burn in the appliance.
NOTE: The list of fuels can be updated by your local
dealer as they become available.
To select a fuel type, use the UP/DOWN buttons to scroll
to the desired fuel type and then press the button under
"Select". The arrow will change to indicate the currently
selected fuel.
NOTE: If you are burning a high ash fuel set the fuel
selection to "Utility Pellets".
When purchasing corn or wheat to burn in your appliance,
read the ingredient label very carefully. Do NOT purchase
fuel that contains any additives such as oils (i.e.
soybean oil) and meals as it will result in poor appliance
performance. If you are buying corn or wheat the only
ingredient that should be listed is corn or wheat.
7036-187M
AUTO/MANUAL SETTINGS
Automatic
Manual
Manual
Off
Medium
Automatic
Manual
Off
August 13, 2018