General Information About Using The Wall Control; The Main Menu - Quadra-Fire MT VERNON Owner's Manual

4. Notification Icons
The system notification area uses icons to indicate if an
action needs to be taken. In battery mode it indicates the
approximate charge level of the battery.
Hopper Lid
Door Open
Open
Operating on Optional Battery Backup
Fully
2/3 Charge
Charged
Figure 19.1
5. Function Buttons
The function buttons have two labels above them in the
display area. Their labels can change depending on the
menu screen. On the main screen the left button will bring
up the system menu and the right button has functionality
only in MANUAL cycle (Figure 19.1).
6. Current Temperature
The current temperature area indicates the temperature of
the room where the wall control is located. The temperature
displayed can be in appliances of Fahrenheit or Celsius.
The desired appliances can be selected via the system
menu (See Figure 19.2).
D. General Information About Using the Wall
Control
When a button is pressed and the screen changes from
the main screen to one of the other screens, the back light
will illuminate the display area. As buttons are pressed, the
back light continues to be illuminated.
Most screens have a DONE button which can be used to
return to the previous screen ultimately returning to the
main screen.
The wall control will automatically revert back to the starting
screen if there is no activity for 15 seconds except for the
CONFIRM FUEL CHANGE screen. The main screen will be
illuminated for an additional 10 seconds and the back light
will shut off.
If the wall control is subjected to a static shock, the screen
may go blank. If this happens, wait 25 seconds and press
any button. This will reset the screen restore functionality
and turn on the back light. If this does not work, call your
dealer.
August 13, 2018
Low Fuel
1/3 Charge No Charge
E. The Main Menu
The menu is the heart of customizing the operation of the
pellet appliance system to your personal liking. The choices
on this menu are:
MENU
Set Comfort Level
Auto/Manual/Off
Fuel Type
User Settings
Figure 19.2
1. Set Comfort Level (Temperature)
The most basic operation of the wall control is to turn the
appliance on or off depending on the requirement for heat.
From the main screen, the SET COMFORT LEVEL screen
can be activated by pressing the UP or DOWN button on
the right side of the display area.
The first time either button is pressed the display changes
to the SET COMFORT LEVEL screen and shows the
current set temperature. Subsequent presses or holding
the UP or DOWN button will change the set temperature
(Figure 19.2).
You can override the programming either permanently or
temporarily. The HOLD TEMP button (lower right) on the
SET COMFORT LEVEL screen is used to override preset
programming (Figure 20.1 on page 20). By pressing
the HOLD TEMP button, the current set temperature will
permanently override any programmed temperature in
the 7 day setback programming. This is a convenient way
of overriding a program when your schedule changes
temporarily and you don't want to reprogram the setback
functions on the wall control.
To release the permanent override, press the button
labeled RESUME when in the HOLD TEMP cycle. Pressing
the button again will resume the programming at the next
program interval (Figure 20.1 on page 20).
7036-187M
MT. VERNON AE INSERT
MENU
Program
Set Day/Time
Set Date
Service Info
19