Quadra-Fire MT VERNON Owner's Manual page 22

Pellet insert advanced energy ae
Table of Contents

Advertisement

MT. VERNON AE INSERT
b. Set Date
When the SET DATE screen is entered the month
name is highlighted. Use the UP/DOWN buttons to
select the proper month then press the button under
"Set/Next."
The highlight will move to the day of the month display.
Using the UP/DOWN buttons, select the current date
then press "Set/Next." The highlight will move to the
year display. Select the current year and press "Set/
Next" then the highlight will be back on the month
name display.
September
2007
Figure 22.1
September
28
Figure 22.3
6. User Settings
Items that are rarely changed are stored under the USER
SETTINGS.
USER SETTINGS
Temp Units F/C
Flame Height Adjust
Temp Differential
Figure 22.4
a. Temp Appliances F/C
TEMP Appliances is used to change from Fahrenheit to
Celsius and back for the temperatures displayed.
Figure 22.5
22
September
2007
28
Figure 22.2
2007
USER SETTINGS
Temp Cal
Properties
Elevations
Conv Blower Speed
b. Flame Height Adjust
FLAME HEIGHT ADJUST is used to adjust flame
height (fuel feed rate) for specific installation and fuel
type. The dealer will usually adjust this if necessary on
installation and can advise on specific settings for a
particular application.
Figure 22.6
c. Temp Differential
TEMPERATURE DIFFERENTIAL is used to change
the set default temperature differential. This sets how
far below the set point the wall control allows the room
temperature to fall before the appliance turns back on.
It is usually set at time of installation.
Figure 22.7
d. Temperature Calibration
TEMPERATURE CAL is used to calibrate the
temperature on the wall control. If for some reason
you feel the wall control is not accurately reading the
temperature you can calibrate it to a thermostat that
you know is accurate. Press the UP/DOWN buttons to
desired temperature.
71.6
DONE
Figure 22.8
e. Properties
PROPERTIES shows the version of software for the
control board and wall control. If you are placing a
service call with your dealer, they may ask you to go to
this screen and read them the information under "WC"
and "SC".
WC
SC
CB
CV
Figure 22.9
7036-187M
TEMPERATURE CAL
O
F
Cal Adj:
-13
SET
PROPERTIES
UFTI: 029
40h
6Bh
Rev:
004
000
TC:
-28
000
DONE
August 13, 2018

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents