Babboe Curve Assembly Instructions Manual page 63

Step 7.3
INSTALLING THE CONNECTION PROFILES (REAR)
PARTS
• 2x Connection Profile (the longest steel profiles in box II)
• Sachet E (2x M6 bolts (short), 2x M6 bolts (long),
4x M6 cap nuts, 4x M6 spring washers, 8x M6 washers)
23
J
1. Attach both connection profiles (rear) to the rear panel using a short bolt in the
top holes on both sides (detail J) and a long bolt in the bottom holes on both sides
(detail K). For now, the middle holes in both panels remain unused.
Please note
Adhere to the specified order for nuts, bolts and washers, etc. See detail J and K for the
correct order.
TOOLS
• Spanner # 10
• Phillips screwdriver
K
63