Babboe Curve Assembly Instructions Manual page 60

4. Next, hook the cable over the
cable hook (indicated with an
arrow in figure 18).
5. Then lift the lower lever to attach
the last adjusting screw there
(see figure 19).
The brake cable is now installed
(see figure 20).
6. Repeat these steps for the right
front wheel and the right brake
cable.
Please note
The brake cable should be properly adjusted by the manufacturer at time of delivery. If this
is not the case, adjust the adjustment screws on the handlebar or at the brake lever on the
front wheel.
60
18
19
20