Babboe Curve Assembly Instructions Manual page 53

Step 4
ATTACHING THE STEERING DAMPERS
TOOLS
• Spanner # 13
• Hex key # 6
This step involves attaching the steering dampers to the front frame. The steering dampers
are already pre-mounted onto the rear frame at time of delivery (see figure 8).
1. Remove the specified (1) nuts
and bolts from the steering
dampers. Keep the removed
nuts, bolts and washers handy.
2. Next, extend the damper so
the attachment hole of the
damper comes on top of the
attachment hole in the front
frame (see figure 9).
3. Securely attach the dampers to
the front frame using the nuts,
bolts and washers removed
earlier. See figure 9 for the
correct order.
8
2
9
53