Installation Checklist - ABB Conceptpower DPA 500 Operating Manual

4.3.5

Installation Checklist

 All packing materials and restraints have been removed from each cabinet.
 Each cabinet in the UPS system is placed in the installed location.
 All conduits and cables are properly routed to the UPS and auxiliary cabinets.
 All power cables are properly sized and terminated.
 A ground conductor is properly installed.
 If the cabinet does not use all module mounting locations, the provided protective
covers are installed on the front and back of the cabinet.

Battery cabinet installation instructions have been completed.
 Air conditioning equipment is installed and operating properly.
 The area around the installed UPS system is clean and dust-free. (It is recommended
that the UPS be installed on a level floor suitable for computer or electronic equipment.
 Adequate workspace exists around the UPS and other cabinets.

Adequate lighting is provided around all UPS equipment.
 Any optional accessories are mounted in their installed location and properly wired.
 Summary alarms and/or building alarms are wired appropriately. (OPTIONAL)

Startup and operational checks performed by certified service personnel.
Modifications reserved
Page 29/94