User Interface - Communication; System Display - ABB Conceptpower DPA 500 Operating Manual

6 User interface - communication

STANDARD ITEMS

System Display

DPA display (or module display) 2 x 20 character LCD display (one per module)
MIMIC diagram
RS232 on Sub-D9 port
RS232 on USB port
Customer Interfaces:
Inputs DRY PORT
Customer Interfaces : Outputs
DRY PORT
RS485 on RJ45 port
RS485 on RJ45 port
Slot for SNMP
6.1 System display
The user-friendly touchscreen graphical display the system level, offers the opportunity of directly
monitoring the system status as well as measurements and access to the EVENT LOG. The graphical
display additionally provides status and measurements of each single module within the system. All
other commands must be performed on the DPA display. With both displays in place (module and
system level), the UPS offers full user friendliness without making compromises on robustness
Modifications reserved
Page 12/25
7" touchscreen display (one per frame)
LED-indicator, 5x green/red LEDS (one per module)
For monitoring and integration in network management
1 Remote Shut down [EMERGENCY OFF (Normally closed)]
1 GEN-ON (Normally open)
1 Programmable Customer's Inputs (Normally open)
1 Temp. Sensor for Battery Control
6 voltage free contacts
For remote signaling and automatic computer shutdown
Remote monitoring system with remote panel (graphical display)
For multidrop purpose
SNMP card
For monitoring and integration in
network management
Slot for SNMP
.