How To Set The Nfc Operation All Time Permission; Confirmation For The Generation Of The Trouble Of The Nfc - Toshiba SMMS-e Quick Reference

NFC (Comminication)

How to set the NFC operation all time permission

Follow the below procedure.
Rotaly switch
Step
SW01 SW02
2 1
(1)
2 1
(2) 2 1
(3) 1 1
* Do it again if the 7-segment display is different from the above.
* The functions other than the auto-address setup and test operation of this Application can work normally even if
the functions of the auto-address setup and the test operation are disabled.

Confirmation for the generation of the trouble of the NFC

When you can not read out the information of the NFC Tag Device with your Smartphone, perform the following
operations after restarting the power supply of the outdoor unit.
If there is no problem, refer to the Operation Manual of "SMMS WAVE TOOL FOR SMARTPHONE".
Rotaly switch
Step
SW01 SW02
(1) 2 16
(2) 1 1
Trademark
Android is a trademark or registered trademark of Google Inc.
QR code is a trademark or registered trademark of DENSO WAVE Inc.
Push switch
SW03 SW04
14 -
14 (Press 5 secs)
Press for more
14
than 10 secs
1 -
Push switch
SW03 SW04
14 -
1 -
7-segment display
NFC operation
[ A ] [ B ]
(Default setting)
After the power input,
:below 48 hours
[ nF] [ c.00 ]
[NFC operation permit]
:more than 48 hours
[NFC operation prohibit]
NFC operation
[ nF] [ c.01 ]
all time prohibition
NFC operation
[ nF] [ c.02 ]
all time permission
[ U.1. ] [ - - - ] Return the switch
7-segment display
NFC-I/F board
communication
[ A ] [ B ]
[ nF] [ c.Er ] Abnormal
[ nF] [ c.00 ] Normal
[ U.1. ] [ - - - ] Return the switch
89
setting