How To Set The Nfc Operation All Time Permission; Confirmation For The Generation Of The Error Of The Nfc - Toshiba MMY-MAP0806HT8P Service Manual

How to set the NFC operation all time permission

Follow the below procedure.
Rotaly switch
Step
SW01 SW02
2
(1)
2
(2) 2
(3) 1
*Do it again if the 7-segment display is different from the above.
*The functions other than the auto-address setup and test operation of this Application can work normally
even if the functions of the auto-address setup and the test operation are disabled.

7-8-2. Confirmation for the generation of the error of the NFC

When you can not read out the information of the NFC Tag Device with your Smartphone, perform the following operations
after restarting the power supply of the outdoor unit.
If there is no problem, refer to the Operation Manual of "SMMS WAVE TOOL FOR SMARTPHONE".
Rotaly switch
Step
SW01 SW02
(1) 2
(2) 1
Trademark
Android is a trademark or registered trademark of Google Inc.
QR code is a trademark or registered trademark of DENSO WAVE Inc.
Push switch
SW03 SW04
1 14
1 14 (Press 5 secs)
Press for more
1 14
than 10 secs
1 1
Push switch
SW03 SW04
16 14
1 1
7-segment display
[ A ] [ B ]
- [ nF] [ c.00 ]
[ nF] [ c.01 ]
[ nF] [ c.02 ]
- [ U.1. ] [ - - - ]
7-segment display
[ A ] [ B ]
[ nF] [ c.Er ]
-
[ nF] [ c.00 ]
- [ U.1. ] [ - - - ]
− 157 −
NFC operation
setting
(Default setting)
After the power input,
:below 48 hours
[NFC operation permit]
:more than 48 hours
[NFC operation prohibit]
NFC operation
all time prohibition
NFC operation
all time permission
Return the switch
NFC-I/F board
communication
Abnormal
Normal
Return the switch